On The Road Again

The Sper Team hits the road for the first time in 2015.  We are off to Austin Texas!  At first we thought that we would get to go SXSW, but no we were a week late.  We are heading to the National Safety Council Texas Conference and Expo, March 30-31 at the Austin Convention Center (Booth 321).  We may just have to check out the sushi at Uchi or the BBQ at Stubb’s while showing the great people of Texas our outstanding line of Environmental Meters.

At the Texas Safety Show, Sper Scientific will be demonstrating its line of Indoor Air Quality (IAQ) meters and monitors, Environmental meters, and Light & Sound meters.  This is first time that Sper Scientific has exhibited at this event.  Sper Scientific’s focus at this event is to help environmental and safety professionals optimize their processes and to demonstrate its lineup of new and innovative environmental measurement instruments.

Since 1982, Sper Scientific has been a leading supplier of environmental measurement instruments used by science and industry to maintain EPA compliance, meet OSHA regulations, and measure a wide range of environmental parameters. Sper Scientific also offers NIST traceable instrument certification at its headquarters in Scottsdale, Arizona.

Who Dat Back In NOLA? Sper Scientific Dats Who!

The American Water Works Association hosts its annual Water Quality Technology Conference (WQTC) and Exposition Convention and Exposition in New Orleans November 16-20, 2014.  This established and highly regarded conference provides a practical forum for a wide range of water professionals to exchange the latest research and information. The Opening Session will highlight the 40th anniversary of the Safe Water Drinking Act featuring Peter Grevatt, Chief of USEPA’s Office of Ground Water and Drinking Water, and David LaFrance, AWWA CEO in a discussion on AWWA’s Total Water Solutions™.

2014 will mark the second time that Sper Scientific (Booth 700) will exhibit at WQTC.  Sper Scientific’s focus at the event is to help water professionals optimize their processes and to demonstrate its lineup of innovative water quality products.

Sper Scientific delivers dependable, accurate water quality measurement devices to monitor the changes in water over time from seasonal variations, weather, as well as, man-made pollution. Whether you are in agriculture, aquaculture, industry, education, power generation, or municipal waste water, Sper Scientific offers a complete line of water quality meters, to test the acidity, alkalinity, conductivity, dissolved oxygen (DO), Oxygen Reduction Potential (ORP), of your water.

See You In San Diego

Sper Scientific is pleased to announce that they will be exhibiting (Booth #5721) at the National Safety Council Congress (NSC) and Expo in San Diego September 15-17.  The NSC Congress & Expo (www.congress.nsc.org) is the world’s largest annual “must attend” event for safety, health and environmental professionals. For more than 100 years, professionals have turned to this event for industry-leading technology, education, networking opportunities and the tried and true products and services needed to stay at the forefront and remain competitive within the industry.

At NSC, Sper Scientific will be demonstrating its line of Indoor Air Quality (IAQ) meters and monitors, Environmental meters, and Light & Sound meters.  This is first time that Sper Scientific has exhibited at this event.  Sper Scientific’s focus at the NSC Congress and Expo is to help environmental and safety professionals optimize their processes and to demonstrate its lineup of new and innovative environmental measurement instruments.

Since 1982, Sper Scientific has been a leading supplier of environmental measurement instruments used by science and industry to maintain EPA compliance, meet OSHA regulations, and measure a wide range of environmental parameters. Sper Scientific also offers NIST traceable instrument certification at its headquarters in Scottsdale, Arizona.

Harsh Environments Are Perfect For AquaShock®

Demanding work environments such as a power plants, aquaculture, and water treatment facilities understand the need for measurement instruments that are designed to survive in the harshest of places. Since its launch in 2012, the AquaShock® line of handheld waterproof  water quality meters changed the industry. The AquaShock® is not only IP67 waterproof, but they are the first to feature waterproof probe attachment points that also accept standard (non-waterproof) BNC probes.

According to company President Devin Sper, “the probe connection point has always been a vulnerability of other meters claiming to be waterproof. The probe is either non-replaceable, or the meter is not truly waterproof when the probe is connected, which defeats the purpose.”

AquaShock® meters feature a screw-down, waterproof housing surrounding the BNC probe connection. When a waterproof connection is not needed, any BNC-connected probe can be utilized. AquaShock® meters are also shockproof, and feature a “soft-grip” surface to help prevent accidental drops, making them perfect for field use. Other features include a large, backlit LCD display, 99-memory review, min/max/average, internal clock and calendar, C° & F°, auto-ranging, and automatic temperature compensation.

There are four AquaShock® models available, all with five-year warranties, measuring pH, mV, ORP, Dissolved Oxygen (DO), conductivity and TDS.  Full product information on the AquaShock® line of water quality meters is available at http://www.SperDirect.com.

Sper Scientific Offers NIST Traceable Instrument Certification At Its Headquarters In Scottsdale, Arizona.

At Sper Scientific, we certify two categories of instruments: 

  • Newly purchased instruments are certified prior to shipment, which may extend your order ship day by up to 10 business days. Not all instruments can be certified, when certification is possible an ordering option will appear on the product page.
  • Previously purchased instruments are returned annually to Sper Scientific for certification, and may take up to 10 business days to certify.

Purpose of the Program:
There is an increasing requirement by customers for documentation supporting manufacturer’s claims of accuracy on their scientific equipment. This is partially due to the increasing acceptance of quality standards, such as ISO 9000* and GMP**, which require that periodic certification of test equipment be performed and documented.  Most testing is done in-house with our own state-of-the-art equipment. Whenever possible and practical, we use N.I.S.T. traceable equipment and N.I.S.T. procedures.

* ISO 9002 1987 (E) Section 4.10
** FDA Good Manufacturing Practices Section 820.61

Each certified product comes with:
• A serial number
• A calibration or certification label
• One of three certificates.*

For a complete list of certified products please go to www.sperdirect.com